How do you restore an old wood door?
May 12, 2014 · Preserving old homes is the green thing to do, says host of HGTV's "Rehab Addict" Nicole Curtis. It's good for our history and our environment. "More homeowners need to get on board," she says ...
What kind of repairs do you need to do on antique doors?
Sep 25, 2015 · This bedroom was boarded up before the Rehab Addict team arrived, so it was a pleasant surprise to find such a spacious bedroom behind closed doors. After: Vintage Decor. Nicole blended vintage pieces with thrift-store finds to create a space that reflected the home's historical style. Before: Neglected and In Need.
Why should you refinish your wooden doors?
1. Pull the hinge pins and take the door down. Lat it flat on a pair of sawhorses and cover the ground with a drop cloth. 2. Take off all the door hardware, including the knob, hinges and latch,...
How to repair damaged wood doors and Windows?
Jan 07, 2019 · Mix the oxalic acid in a plastic container. Add 1 oz. of oxalic acid powder (about 2 tablespoons) to 1 cup of hot water and stir it until the powder dissolves. Then brush the solution onto the stain with a disposable sponge brush and let it work for 20 minutes. You can repeat the process to further lighten the stain.
Brand New Series Starring Rehab Addict's Nicole Curtis Is Coming to HGTV
Home renovation star Nicole Curtis helps overwhelmed DIY-ers restore their historic homes in new HGTV series Rehab Addict Rescue, premiering January 2021. Find Out More
Go Behind the Renovation on Rehab Addict: Detroit
Follow along as HGTV renovates a crumbling historic home in downtown Detroit.
How to polish brass latches?
Apply brass and copper polish with a clean cotton cloth, rubbing vigorously. Wait a few minutes and buff to a shine. To better clean brass and keep it looking good for longer rub the polished latch with a good quality wax polish. Make a card template of the latch and keep it with your polish – that way you can polish the latch without having to worry about spoiling the door. An occasional application of polish on the hinges will keep rust at bay too.
How to get glue off of a peg?
Wipe away excess glue before it dries – a damp washing up sponge is ideal. Leave the glue to set completely. The peg can now be sawn off flush with the surface. A fine-toothed handsaw with its flexible unsupported blade is ideal for this job. Use the other hand to hold the blade level. Protect the wooden doors by placing pieces of thin card beneath the saw teeth. Rub smooth with a piece of abrasive paper wrapped around the end of a pencil.
Can you use wax filler sticks on wood?
Remember to always replace the lid firmly on the can when using caulk and if it’s a bit dry a little water can be mixed in to make it more pliable. Wax filler sticks are also useful for repairing surface damage and they are available in a range of different shades to match the wood you are working with.
How do I stain a door?
Stain the door by brushing stain onto the surface with a paintbrush and wiping off the excess with a rag. If you didn't strip the door finish, be sure the stain you're using matches the stain already on the door.
How do I sand a wood door?
Sand the door down to the bare wood after you strip it. Use a palm sander and 100-grit sandpaper to get off any remaining old finish, then switch to 120-grit paper to smooth the wood. Finish off by hand-sanding with 150-grit sandpaper.
How do I top coat a door?
Top-coat the door by brushing on a clear finish. Polyurethane varnish works well for interior doors, but if the door is exposed to the sun, use spar varnish. It provides better UV resistance.
What degree does Chris Deziel have?
Chris Deziel has a bachelor's degree in physics and a master's degree in humanities. Besides having an abiding interest in popular science, Deziel has been active in the building and home design trades since 1975. As a landscape builder, he helped establish two gardening companies. Related Articles.
How to fix scratches on wood?
Hide scratches, chips and worn away finish with a fresh dose of stain. Then wipe the woodwork with a clean rag to remove the excess stain. Let the stain dry overnight. Completely refinishing the area may be the only way to make flawless repairs to badly damaged doors, windows and moldings.
How to get rid of a sand stain on a carpet?
Mix the oxalic acid in a plastic container. Add 1 oz. of oxalic acid powder (about 2 tablespoons) to 1 cup of hot water and stir it until the powder dissolves. Then brush the solution onto the stain with a disposable sponge brush and let it work for 20 minutes. You can repeat the process to further lighten the stain.
How to lighten a stain?
You can repeat the process to further lighten the stain. Wipe the bleached wood with a sponge and clear water. Then neutralize the oxalic acid by applying a solution of 3 tablespoons of borax to 1 gallon of water with a sponge. Finally, rinse the bleached wood with water again and let it dry overnight.
Cleaning and restoring dirty wood trim
We are very lucky that most of the wood trim in our house has never been painted. However some of it has not been cleaned in 100 years. Now I am sure it was wiped down many times, but in many cases it looks darkened dirty. The closer to the floor, the worse it it. The are also several areas where they did something and now it looks worse than ever.
Re: Cleaning and restoring dirty wood trim
Once you start working on the trim with the alcohol and steel wool there will be no turning back. Personally, I think the woodwork is gorgeous as it is. It's patina, not filth.
Repairing an Antique Door
An antique door is a unique problem, because it’s a small enough job that it seems fairly easy but important enough that you don’t want to mess up, since doors are so highly visible. The most common repair that needs to be done on antique doors is usually patching old hinge gains and latch holes with a wood Dutchman.
Refinishing an Antique Door
This can be quite a process to do correctly, so it’s probably worth your while to check the area and see if there’s a professional carpenter who can at least do some of the work for a reasonable rate.
