To restore your redwood’s color, use a bristle brush to scrub the wood’s surface. You can use a solution of 1 cup trisodium phosphate and 1 cup of household bleach mixed with 1 gallon of water. Purchase trisodium phosphate on Amazon Choose the Best Treatment
Full Answer
What to do if paint gets on the awning?
Use an 100 grit paper to roughly go over the areas quickly then a second time with 220 grit paper to remove the sanding lines and leave the surface finely sanded. You can sand by hand or with an orbital or vibrating sander. Redwood sands easily. Once finished, dust off and add sealant. 2 coats is what we apply.
Can You stain Redwood to make it water resistant?
Redwood Empire Awning is a leading producer of exterior shade products, agricultural covers and truck tarps. Our shade products service the Sonoma, Napa, and Mendocino Counties. Our agricultural covers and utility bed tarps are shipped worldwide. We’ve been in continuous business under the same family ownership since 1951. Our pride of ...
How do you protect redwood decking from water?
2. Wash both sides of the fence with the power washer and the 25-degree tip, keeping the tip about 18 inches from the surface of the wood and moving it along the grain. Change to …
How do you restore Redwood to its original color?
How to sand redwood?
You can sand by hand or with an orbital or vibrating sander. Redwood sands easily.
How long does redwood furniture last?
Your Forever Redwood Furniture will last for decades in year-round weather with minimal maintenance. Depending on the wood grade you choose, under harsh year-round outdoor conditions, you can expect your furniture to last from ten to thirty years. Being outside year round is rough on any wood’s finish. The surface absorbs UV rays, pollution, ...
How do I clean a pergola?
Occasional cleaning will always spruce things up. Hose down and wipe it down with a rag and bucket of water. If you are cleaning a large pergola, use a soft brush first and then a wipe down with a rag to clean deeper.
How long does it take to sand a bench?
For example, a typical bench takes 30 minutes to sand the most visible areas by hand. If you are a perfectionist and want to do every area thoroughly, figure 90 minutes.
Does redwood hold up to UV rays?
The surface absorbs UV rays, pollution, constant variations in moisture and temperature and it also oxidizes. This is why most wood just doesn’t hold up and the surface color slowly changes towards a silver patina as the finish fades. But, with Forever Redwood, you don’t have ...
Does forever redwood need to be replaced?
But, with Forever Redwood, you don’t have to worry about replacing your set after a few years. Redwood is the most decay resistant wood that grows in North America and we use the best sealant on the market to keep the gorgeous natural wood tones from fading quickly.
How do I keep a redwood fence looking good?
A simple maintenance program conducted at regular intervals will keep the fence looking its best. The program should include a thorough washing, repair of cracking and separating boards, and a touch-up finish. Although redwood doesn't really need a finish, applying one with a small amount of pigment will delay discoloring.
Why is redwood used for fencing?
Redwood is one of the most common fencing materials because it has natural oils that resist rot and mold and it lasts longer outdoors than most other wood species. It discolors quickly in sunlight, however, and it cracks and warps when it gets too dry. A simple maintenance program conducted at regular intervals will keep the fence looking its best.
