Full Answer
Are antique trunks repairable?
*Refinish An Antique Trunk* The slow and steady approach involves the use of steel wool, maybe a wire brush, and several hours of rubbing in circular motions. The rubbing is done by a professional masseuse, on your sore muscles.
How to clean a vintage tree trunk?
Trunk Restoration Few things so clearly have a story to tell like an antique trunk. In our years of restoring antique furniture, I’ve often said of a piece of furniture, “If only it could talk…” & nothing is truer than with a trunk.
What is trunk restoration?
Sanding; There's going to be lots of that. The best way is a graduated sanding where you start with 60 grit, to remove some of the larger burrs, then gradually reduce the grit to 300 until the piece is nice and smooth. For the paper edging, start with 220, then 300, unless it is badly damaged, then you can use 150.
How do you disassemble an old trunk?
Dec 07, 2019 · Since the main part of the trunk is canvas, though, I thought it would probably ruin the canvas by applying stripper to it. Ready to apply stripper; Bottom of trunk; First layer of stipper applied; As I mentioned, I have used Citristrip on several projects and it works really well. For some reason, though, it hardly budged the paint on this project. After waiting about an hour & …
How do you restore an old trunk?
2:468:02DIY: Refinishing An Antique Trunk - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first step was tearing out all of the old canvas. And then after that we sanded down the insideMoreThe first step was tearing out all of the old canvas. And then after that we sanded down the inside of the trunk and applied a polyurethane to seal during this filming I was not wearing gloves.
How do you repurpose an old trunk?
If you find a beautiful vintage trunk you can even use it a purely decorative piece. It doesn't have to be repurposed as a bedside table, coffee table, nightstand or anything else. Just use it as a place to display a few decorations and place on the hallway or somewhere where everyone can see it and admire it.Sep 10, 2012
How do you reline an old trunk?
3:4322:52Restoring the inside of a Steamer Trunk - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo not only are we going to put some new fabric in here but what I'm going to use is modge podgeMoreSo not only are we going to put some new fabric in here but what I'm going to use is modge podge good old modge podge. Because. It helps with it helps seal in the wood help seal in any smells. Like.
How much are old trunks worth?
The average American made antique trunk is worth about $100 to $300 depending on the style, size and condition. If fully restored prices can be anywhere from $400 to $1300.
How can I put legs in my trunk?
3:548:48How to Make a Vintage Trunk Table! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when you look in you'll see a couple of these with a screw head in there. So hold nice and tightMoreSo when you look in you'll see a couple of these with a screw head in there. So hold nice and tight so that the legs will never like try to rip out of the the base of the trunk.
Can you paint an old trunk?
Clean and sand the trunk until it is free of any dust and has a smooth texture. Dip a paintbrush into the paint until it is barely covered. Wipe it off on a soft cloth to reduce the amount of paint on the bristles. Brush the paint onto the trunk with an light pressure, letting the trunk's original finish show through.
How do I know if my old trunk is valuable?
If you paint anything on the trunk black or gold (metal banding, corners, etc) the trunk's value will fall in the low end of the range. Having the original key pushes the value up, as do any types of tags or labels indicating who made the trunk. Remember - these are general guidelines, every trunk is different.
What material is trunk liner?
Trunkliner Fabric is made from Ecofi nonwoven, solution-dyed synthetic fibers. This extremely durable fabric has excellent colorfastness, UV resistance, as well as a high resistance to mold, mildew and stains—even gas, oil, and salt!
How do you get the musty smell out of an old steamer trunk?
If any odor remains, place a small bowl filled with white vinegar in the bottom of the trunk and close the lid. Vinegar is a natural odor absorber and neutralizer that will help rid the trunk of odor. Leave the bowl of vinegar inside the trunk overnight.
What's the difference between a trunk and a chest?
According to several dictionaries, a "trunk" is a large case or box that can be used when travelling or for storage, whereas a "chest" is used only for storage.May 16, 2012
How to clean a 100 year old tree trunk?
Ensure you remove the 100 year old "glue" and scrub the trunk with bleach and water inside and out. Let the trunk completely dry before sanding all the surfaces - and do sand it. Keep safe, be cautionary, and be certain to wear protective gear as noted below.
What is the biodegradable material used in antique chests?
Over time (as in 100 years or more!) biodegradable materials such as canvas, leather, paper, wood, horse glue , and other organic construction materials begin to break down and deteriorate. In fact, much of the glue used in these antique chests was made from horses and was unprocessed!
What glue was used to hold canvas and paper?
Along with the deterioration of the outside canvas, leather and the inside paper lining. Keep in mind that the glue used to hold the canvas and paper was horse glue which was literally made from horses!
Is horse glue gross?
Yes, it is gross but that's how they did it. This "horse or fish glue" along with the interior/exterior coverings has actually saved and preserved the beauty of the 100+ year old cured and seasoned wood. It just needs to be safely removed!
Does Pirate's Lair have trunk restoration tools?
For this reason The Pirate's Lair does not offer trunk restoration tools or parts as it cannot and does not want to be held legally or morally responsible for any potential health hazards or risks to people which may be incurred from restoring these antique trunks.
What is a third restoration?
The third is a moderate restoration, where as much of the original hardware is re-used. Whenever possible, parts from the same period (and preferably manufacturer) are installed and failing that, replaced with new hardware.
What grit to use for tight corners?
For the tight corners, a slotted screwdriver or chisel works just as well. Sanding; There's going to be lots of that. The best way is a graduated sanding where you start with 60 grit, to remove some of the larger burrs, then gradually reduce the grit to 300 until the piece is nice and smooth.
What tools do I need to remove canvas?
Tools:#N#Utility knife - for removing old canvas cover. (have lots of extra blades since the years worth of dirt in the material act like sandpaper)#N#Metal Scraper - scraping off old paper, tucking edges of old material under seams#N#Drill and Wire Wheel - For removing rust from metal parts#N#Nail puller and hammer - removing old hardware#N#Sharp Chisel - to straighten the points on the old nails and tacks before pulling#N#Pliers - for straightening nails and tacks#N#Sander - optional but it helps#N#Dust Mask and Glasses - Safety first#N#**Saw - if you need to build a new tray otherwise it's not necessary#N#Supplies:#N#60, 150, 220, 300 and grit sandpaper - lots of that to be done#N#7-8oz leather@ 1 1/4" leather belts - For straps, leather patches and leather handles#N#2X Belt Buckles, rivets, Fiebings leather dye - hardware for leatherwork.#N#Wood Stain/Finish - I used Minwax Polyshades which blends both stain and polyurethane but you can do them separately if you want.#N#Masking Tape - to mask of edges for staining#N#Beeswax Polish - to protect the metal from rusting again
How many layers of paper do you need for edging?
For the paper edging, start with 220, then 300, unless it is badly damaged, then you can use 150. The paper is set in layers, so if you remove one layer completely, you'll need to keep sanding till you get down to the next one which will make lots of extra work for you.
Do I need to stain the inside of a tree trunk?
There's no need to sta in the inside of the trunk and in fact, the raw wood look made a nice contrast. Once the stain/finish had dried overnight, I then used the beeswax polish and applied three coats on both the outside and inside of the trunk, wiping off the excess between coats.
Step 1
Wipe down the trunk (ours was leather) and all its hardware with an all-purpose cleaner.
Step 3
Tape off 2 1/4-inch bands on all four of the trunk’s sides with painter’s tape, then fill them in with a darker color. Paint right over the hardware where needed. Peel off the tape while the paint is still slightly wet.
Make Your Desk Accessory Set
Use various containers like Mason jars, vases and tin cans to create a matching desk accessory set that will keep all your school essentials organized and within reach.
What metal is used in trunks?
Most trunks have some metal exposed somewhere - thin black metal around corners, heavy steel corners, latches, hasps, and shoulders, brass locks and nails, and pressed or flat tin which was used to cover the pine boards beneath and add a decorative touch. If you have an old trunk that shows signs of rust on the steel or tin parts, ...
Is lead paint harmful?
Lead-based paint is potentially harmful - protect yourself, those around you, and your property in accordance with sound safety practices. Respirators, disposable clothing, gloves, safety glasses/goggles, etc are all required for this type of work. Don't mess around with your health!**.
Do trunks have brass?
BRASS. Some trunks have quite a bit of brass on them. Most trunks do not. Sorry, but that's how it is. Check out the heads of the nails on your trunk, along with the lock and any other pieces that have a little gold color showing.
How to determine if an antique trunk is worth more?
1. Measure the size of your antique trunk. If the your trunk is 30 inches (76.2 cm) or under then your trunk will be worth more. The reason is that smaller trunks fit easier in peoples homes than larger trunks. ...
How many times has wikihow been viewed?
To create this article, 10 people, some anonymous, worked to edit and improve it over time. This article has been viewed 34,473 times.
