How to make a hot tub cover replacement?
Rinse your hot tub cover with cool water using a garden hose. Spray with a gentle, non-foaming, ph neutral cleaner (we recommend Simple Green) and wipe clean. For stubborn dirt, use a non-abrasive sponge. * Never use laundry detergent, abrasives, alcohols, dish soaps or harsh cleaners.
How to repair and restore a hot tub?
Look for black spots on your hot tub cover that indicate mold. Spray disinfectant cleaner or a mixture of bleach and water on any evidence of mold. Allow it to sit from 15 to 25 minutes and then scrub with a clean, damp rag. Later on, just wipe and rinse to get the new, fresh look.
How do you fix a hot tub?
Dec 30, 2016 · Your spa or hot tub cover is made with marine grade vinyl. It’s tough, but not tough enough. Over time, UV rays will deteriorate the vinyl, and you may notic...
How to repair hot tub scratches, cracks, and stains?
May 01, 2019 · Use a soft towel or shammy to dry the top and the bottom of the hot tub cover. DO: Apply a vinyl protectant or conditioner once the cover is dry. It’s just like using lotion on your skin after you’ve had a shower. You want the cover to be clean but you also want it to be soft so it doesn’t dry out or crack.
How do you rejuvenate a hot tub cover?
0:234:09How To Repair, Restore & Protect Marine Vinyl Spa, Jacuzzi & Hot ...YouTubeStart of suggested clipEnd of suggested clipSo you can use the two together in alternating layers or you can even mix them together and intoMoreSo you can use the two together in alternating layers or you can even mix them together and into what we call a glaze.
Can you recover a hot tub lid?
If the hole in your hot tub cover has not only torn the vinyl liner, but it has also penetrated the foam, you'll need to patch the foam as well. Simply purchase a piece of foam that you can cut to fit the shape of the hole. Insert the foam into the hole and then apply a patch to both sides of the foam.Jan 5, 2018
How do you condition a hot tub cover?
1:051:46How to Clean Your Hot Tub Cover - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just rub it in also never store anything on the cover. And don't allow twigs leaves or otherMoreYou just rub it in also never store anything on the cover. And don't allow twigs leaves or other debris to collect and sit for too long replace.
Can I use Armor All on hot tub cover?
Do not use protectants that have petroleum or alcohol in them, like Armor-All, which will damage the vinyl on hot tub covers. If you choose to use bromine, use as little as possible and make sure to wipe the surface of the cover down very well.
Why is my hot tub lid so heavy?
The main reason why the cover gets heavier with time is that the foam core becomes waterlogged. The water that's being soaked into the core makes the cover heavy. And once that occurs the cover becomes not effective at protecting your hot tub from the elements.
Can you replace the vinyl on a hot tub cover?
0:079:21Hot Tub Vinyl Top Repair / Re-Cover, $85 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis picture was taken prior to the replacement. Actually the original top is still there and IMoreThis picture was taken prior to the replacement. Actually the original top is still there and I simply Bond a new marine grade vinyl which I got at a boat shop on top of the original.
How long should a hot tub cover last?
On average, a hot tub or swim spa cover will need to be replaced every 5–7 years. While some covers are built to last much longer than others, any object that is subjected to the elements will eventually show signs of wear. Knowing when to replace your cover may not be as easy as you think.
Can you dry out a waterlogged hot tub cover?
Stand or lay the foam in a sunny part of your yard to allow air to pass under them. Turn the vinyl cover inside out and towel the inside of the cover dry. Lay it in a sunny spot as well. Spray the inside of your vinyl cover and each surface of the foam pieces with a mildew inhibitor and let them dry.
How do I extend the life of my hot tub cover?
6 tips to extend the life of your hot tub coverClean your spa cover regularly. ... Apply a vinyl protectant spray. ... Use a cover lift to prevent damage. ... Avoid extreme exposure to the elements. ... Keep kids and pets off the cover. ... Don't forget about the underside.
What can I use to clean the underside of my hot tub cover?
Although the underside of your cover requires only a gentle rinse with the hose, the top will need a little more attention. Spray it with a vinyl cleaner recommended by the hot tub cover manufacturer or with a mild vinegar and water solution.Jan 17, 2019
Should I cover my hot tub cover?
When your spa is left uncovered, heat escapes and its shell is exposed to the fading properties of the sun. So, it's wise to invest in a hot tub cover lifter.Nov 12, 2018
How do I protect my hot tub cover in the winter?
Protect your hot tub's cover by securing over it a tarp or specialized winter spa cover. *Pro Tip: To avoid damage to your hot tub's cover from the weight of accumulated snow and ice, place plywood boards on top of it before securing an extra cover or tarp over it.Jun 19, 2019
How to protect hot tub from sun?
NOTE: Covering your entire hot tub and cover in a plastic tarp will greatly increase the life of the cover. Keeping the cover dry and out of the sun is one of the best defenses against aging. If you tend to close your tub for a few months, take the time to cover it for storage. A regular tarp works best to seal out rain, snow, and damaging sun.
How long does it take for a hot tub to dry out?
On very nice days, take the cover off your hot tub and unzip the zippers on the end of the cover to let it dry out for a couple of hours. This will keep your cover nice and light.
Why is my vinyl cover failing?
Another major contributor to cover failure is damage caused by over-chlorination, excessive ozone contact, or imbalanced water chemistry. Imbalanced water chemistry can cause vinyl puffiness, stitching disintegration and bleaching of the cover’s underside. Prevent this by testing & balancing your water weekly.
What is the best cleaner for vinyl?
There are plenty of protective cleaners on the market, but the best one we’ve found is 303® Aerospace Protectant. It not only protects the vinyl, but also keeps it shiny and looking brand new. Just wipe it on the surface, and use a soft cloth to remove any excess. Apply more on seams or low spots that puddle water.
How to get rid of mildew smell in hot tub?
Here is how to eliminate, or at least minimize, the mildew smell from your hot tub cover: On a dry sunny day, take your hot tub cover off your spa and set it up like a tent on a fat surface. Basically make your hot tub cover look like and upside down V-shape. Unzip your cover and air-dry the foam inserts. You can use a variety of cleaners ...
Can vinyl tub cover be opened?
Over time, vinyl can tear or seams can open. Most covers have a zipper system that allows you to quickly remove the cover and check the foam. If water, or steam from your hot tub, finds its way past this barrier, you will notice quickly that your cover will become very heavy and may need to be replaced.
What is a seasonal cover for a hot tub?
Seasonal covers are a smart choice if you want to keep using your hot tub during winter and protect it from the extremities of the weather.
Do you need a spa cover?
Spa covers are an obvious necessity. However, as with anything else in life, you have to make sure to get the best one for your needs. Luckily, choosing the right spa cover should be a straightforward process, considering all the details we shared above.
What is a hot tub cover?
Hot tub covers are one of the most important parts of your hot tub, keeping out foreign objects and debris that can damage the liner or clog the jets. This is especially true if it is kept outside on a patio or deck in the natural elements. In these conditions, however, your cover can go through extreme changes between hot and cold and wet and dry, ...
What to do if a vinyl cover is ripped?
Remove the foam padding from the vinyl and set aside in a dry place so that the water can evaporate. Once dry, replace the foam padding and use strong tape to repair the rip on the vapor barrier. In the event that this repair doesn't work, it might be time to consider buying a new cover.
How to repair a vinyl top?
There are a few ways you can easily repair the vinyl top if there are some small tears. Depending on the severity, you can use a vinyl cement that will cover the repair and also blend in with the top. These cements are generally pretty strong and are a good overall repair method. Small elastomeric patch products, such as a Tear-Aid Vinyl Patch, can be purchased at specialty spa stores as well. These are easy to apply to a clean vinyl surface and very effective.
Can you cut out spa clasps?
Over time the side clasps will begin to rust and can eventually wear out and break. If this happens, you can cut out the broken clasp, and sew in a replacement part from any major spa company .
How to Clean Your Hot Tub Cover
The top and bottom of the cover for your hot tub should be cleaned periodically. Cleaning the cover maintains the appearance, as well as helps it last longer.
Additional Tips
Inspect your hot tub cover for rips, tears, or any signs of wear when you are cleaning it. Minor tears and rips can be fixed with a vinyl repair kit.
About Your Hot Tub Cover
Just like your Master Spas hot tub, your cover was made in our hometown of Fort Wayne, Indiana.
How long does a spa cover last?
Most original spa covers that you get with a new hot tub have a life of about 2 years. Only a high-quality cover should be able to last for at least 5 to 8 years. You have to make sure to reduce the time your cover spends being exposed to the elements such as UV from the sun and rain.
What is thermal blanket?
A hot tub thermal blanket is an insulating, floating cover that lies on top of your hot tub water. Hot tub cover blankets will not only cut down on evaporation, making them a great energy saver but it will also protect your hot tub cover from snow, rain, and dirt.
What is vapor barrier?
The vapor barrier is the plastic that is wrapped around the foam inside the cover. Its main purpose is to protect the foam from absorbing the water.
How to get mold off vinyl?
Place or lay the foam in a sunny part of your garden to allow air to circulate underneath. Turn the vinyl skin over and dry the inside of the skin with a towel. Also place it in a sunny spot. Spray the inside of the vinyl cover and each surface of the foam pieces with a mold inhibitor and allow to dry.
What happens when water turns into steam?
Once the water is turned into steam, it becomes a much smaller molecule than a drop of water. Steam can then easily get into a much smaller area, such as the spaces in the foam. What happens next is that once it cools back down and turns into the water again, it is then trapped inside the foam.
Do you need to clean a hot tub cover?
You may not think your hot tub cover needs a maintenance schedule , but it’s a good idea to save time for cleaning in almost every season. You can also carry out regular inspections during this time so that you can detect and repair any damage to the cover before it becomes serious.
Can you air dry foam core?
Before replacing the foam core, air drying may be the solution. Proceed with caution, but rest assured, it is possible! Remove the spa cover. Carefully unzip the vinyl “skin” and remove each piece of the foam core. Place or lay the foam in a sunny part of your garden to allow air to circulate underneath.
